DOSAGE:
-
UP TO 500 GALLONS, Add 1 oz.
-
501-750 GALLONS, Add 1.5 oz.
-
OVER 750 GALLONS, Add 2.0 oz.
DIRECTIONS FOR USE:
Notes:
-
EYE PROTECTION AND GLOVES RECOMMENDED when using any spa chemicals or cleaners.
-
REMOVE CARTRIDGE OR FILTER GRIDS to avoid product from passing through filtration system.
-
Turn pump off. REMOVE cartridge or filter grids to avoid product from passing through the filtration system.
-
If the leak location is unknown, add the recommended dosage to the skimmer. If you are sure of the location of the leak, pour the recommended dosage directly into the water at the area of the leak.
-
After 30 minutes following application, turn pump on and allow
to run for at least 8 hours. -
Check spa to see if it is still losing water. A second application may be necessary and can be made within the next 24 hours.
-
Replace filter grids or cartridges after 24 hours and resume normal filtration. Spa may be entered 24 hours after application.
FIRST AID:
IF IN EYES – Immediately flush with large amounts of water for 15 minutes, holding eyelids open. Do not attempt to remove contacts unless trained. Immediately transport to a medical center.
IF ON SKIN OR CLOTHING – Immediately wash skin with plenty of water for 15 minutes. Soak the area with an acidic liquid such as lemon juice or vinegar. If irritation develops, contact a physician.
IF SWALLOWED – Do not induce vomiting. Give 1 or 2 glasses of water and contact a physician immediately.
IF INHALED– Remove to fresh air. If breathing is shallow, give oxygen. Seek medical advice.
STORAGE and DISPOSAL:
-
Keep the product dry in the original, tightly closed container when not in use.
-
Store in a cool, dry, well-ventilated area.
-
KEEP OUT OF REACH OF CHILDREN.
-
Rinse empty container thoroughly with water then place in the trash receptacle.